Sanded back

Today I put the last 2 layers of carbon on the seat-tube and then finally got to unwrap all the tubes and sand back the joints and bamboo.

Here’s what she looks like now:

The only things left to do now are:

  1. Drill a hole in the rear bridge for caliper brakes to mount
  2. Bind a small amount of carbon around one of the rear stays, which has developed a hairline crack during the build process.
  3. Coat the entire frame in “clear coat” (an epoxy based varnish)
  4. Put on parts!
This entry was posted in finishing. Bookmark the permalink.

One Response to Sanded back

  1. Shelldon says:

    This is looking really good!

Leave a Reply