Single Cable stop for top-tube, down-tube or seat-tube (screw on)

for bamboo or carbon bicycle

A close up of a 3D printed cable stop. The roughness is due to the manufacturing process, which uses extremely thing layers of plastic built up over each other and welded together by a laser.

This is a gear cable stop designed for use on a bamboo, wooden or carbon fibre bicycle where fittings such as these need to be glued and screwed on, rather than welded. This cable stop has two countersunk screw holes with 3mm diameter to allow for a M3 screw to be used to affix to the bicycle frame. The bottom of this cable stop is curved for tubing 35mm in diameter, so it’s suitable for use on down, top and seat-tubes. See my other smaller diameter design for use on seat and chain stays

Buy from Shapeways for $6 (+ P&H)

One thought on “Single Cable stop for top-tube, down-tube or seat-tube (screw on)”

Comments are closed.